Helmets

SAFETY ON STEEP TRAILS Steep climbs, high-speed racing, all-day adventures: "Down-country" is action-packed, which means the demands on equipment also increase. Down-country is all about going up fast, down fast and repeating. The Moventor 2.0 MIPS is virtually perfectly for the demands of mountain bikers. The MTB helmet is lightweight, well ventilated and has a deeper fit that gives more protection at the back of the head. When the trail points downwards, the ten air inlets and nine air outlets provide good ventilation. In addition to all the well thought-out features for off-road use, the MIPS model has impact protection. This is intended to protect the brain, especially if the cyclist's head hits the ground at an angle during a fall. In a fall, the brain is exposed to strong rotational movements that can lead to severe brain injuries. With MIPS, a movable low-friction plastic shell is integrated into the helmet to ensure that rotation is reduced and the head is better protected. - Multi-Shell In-Mould for a permanent bond between the outer shell and the shock-absorbing helmet material (EPS) - Zoom Ace MTB: Height-adjustable adjustment system to fit the head circumference - Ponytail compatibility: Helmet well suited for ponytail wearers - Laterally adjustable, non-slip TriVider strap system - Moulded lower shell for added durability - QUIN ready—easy upgrade with the separately available QUIN chip for fall detection - MIPS: Impact protection that protects the brain, especially when the cyclist's head hits the ground at an angle during a fall. - GoggFit: Device that allows a pair of goggles to be fixed to the helmet when the athlete doesn't need them while riding - Ventilation: excellent ventilation through 10 air inlets and 9 air outlets

The Veleno MIPS is the most versatile helmet in the MET range, giving the rider access to the entire world of cycling in one go thanks to its variety of features. Featuring the MIPS-C2 brain protection system, the MET Veleno MIPS is able to slide against the head in the case of a crash, redirecting damaging rotational motion. MIPS is a brain protection system—engineered to add protection to the standard construction of helmets in case of certain impacts. The MIPS Brain Protection System (BPS) is attached inside the helmet, between the comfort padding and the EPS. The visor is minimal and removable thanks to invisible anchor clips that keep the design clean and stylish in both modes. The Veleno MIPS comes with 26 air vents and finely engineered internal air channeling to maximize the airflow. It also features two dedicated ports for securely docking sunglasses while resting or climbing. The 360° head belt of the MET Safe-T Upsilon retention system ensures that there will be no pressure points on the skull and its internal shape is comfortable for almost all different shaped heads. - In-mold polycarbonate shell with EPS liner - Fully polycarbonate wrapped EPS liner enhances durability - Extended head coverage for more thorough head protection - MIPS-C2 Brain Protection System offers extra protection in the case of certain impacts - MET Safe-T Upsilon Fit System - The 360° head belt with vertical adjustments allow for a customized fit - The removable visor with hidden anchors ensures maximum versatility - Air Lite straps with an adjustable divider provide a comfortable and customized fit - 26 vents are internally engineered for air channeling to improve ventilation and comfort - Sunglass ports to securely dock sunglasses when climbing or resting - Certifications CE; AS/NZS; US Sizing: - Small = 52 – 56cm - Medium = 56 – 58cm - Large = 58 – 61cm

The MET Trenta MIPS a performance road helmet engineered to maximize ventilation and save you energy with every pedal stroke. Featuring the MIPS-C2 rotational management system, the MET Trenta MIPS is able to slide in the case of a crash, redirecting damaging rotational motion. MIPS is a brain protection system—engineered to add protection to the standard construction of helmets in case of certain impacts. Scientifically designed air vents harness the power of the Venturi effect, pushing out warm air within the helmet through specially positioned exhausts to ensure constant airflow. The tail of the helmet also features an aerodynamic design to effectively drive airflow. - In-mold polycarbonate shell with EPS liner - MIPS C2 rotational management system is engineered to add protection in case of certain impacts - Exceptionally comfortable and secure on the head thanks to refined internal shape - MET Safe-T Orbital Fit System - 360° head belt, and vertical and occipital adjustments offer a customized fit - Air Lite straps with adjustable divider maximize aerodynamic and comfort - 19 vents and an internal air channeling system are engineered to improve ventilation and comfort - Sunglass ports securely dock sunglasses when climbing or resting - Tube-shaped tail improves aerodynamics - Limited contact with the surface of the head helps to maximize the ventilation - Certifications CE; AS/NZS; US Sizing: - Small = 52 – 56cm - Medium = 56 – 58cm - Large = 58 – 61cm

The MonTrailer offers this increased need for protection and a multitude of well thought-out features for off-road use. This mountain bike helmet is light, extremely well ventilated and extremely comfortable and is perfect for racing or the everyday trail tour. - In-Mold for a durable connection with the outer shell with shock-absorbing helmet material (EPS) - Good ventilation with 5 air inlets and 7 air outlets connected with flow channels - Semi-enclosing plastic ring connected to the adjustment system for optimum stability and form-fitness - Bottom edge protects the helmet from external influences - ActiCage, a structural reinforcement integrated in the EPS to optimise stability - Zoom Ace adjustment system with non-slip adjustment wheel for individual fit - GoggFit ensures safe positioning of glasses and provides storage space when not in use - The transparent visor gives the wearer good all-round vision without having to take their eyes off the trail

THE BEST OF BOTH WORLDS The Hyban 2.0 combines a particularly robust hard shell with a huge air intakes. In combination with the integrated, bright LED rear light, the Hyban 2.0 is the perfect everyday helmet for the city. - ABS hard shell: Robust helmet made of EPS foam and injection molded outer shell - High visibility: High visibility due to reflectors - Bug mesh: Full protection from insects - Ponytail compatibility: Perfect fit for people with long hair - Full-ring: Adjustable ring connected to adjustment system enclosing all of the head - Excellent ventilation with 5 air inlets and 8 air outlets - Zoom Ace Urban: Finely adjustable adjustment system with handy adjustment wheel for customisable fit - Large, highly mounted and integrated LED tail light with 180° visibility

The FeatherWeight features In-Mold technology to make a custom shape and fit utilizing a thin outer shell that covers and protects high-density EPS foam. - High density EPS in-mold construction - Tested and certified for CPSC and EN 1078 standards for bicycle use - Two sets of padding included for custom fitting - Crow rivets and 10 flow-vents to keep cool - Small/Medium = 50 – 56cm - Large/X-Large = 58 – 61cm

The Scraper 3.0 is just as much at home on the bike as in the halfpipe, protecting the BMX rider as reliably as the longboard fan. And, with the optional winter kit, you can get after it in all types of weather. The intelligent ventilation system, with its many inlets and outlets, and the numerous adjustment options that adapt the Scraper 3.0 to each head in a few easy steps, ensure the greatest possible comfort. - ABS hard-shell technology - High visibility due to powerful reflectors - Ponytail compatibility: Helmet well suited to plait wearers - Forced Air Cooling Technology: Sophisticated ventilation system for an optimal head climate - Excellent ventilation with 4 air inlets and 4 air outlets - Size adjustment by means of a half-ring made from particularly hard-wearing and slightly malleable plastic for optimal stability and fit - Zoom Ace Urban: Finely adjustable fit system with a handy adjustment wheel Sizing: - Medium: 54 – 58cm - Large: 57 – 62cm

This all-mountain helmet is light, extremely well ventilated and extremely comfortable. It is perfect for racing or everyday off-road use. - In-Mold for a durable connection with the outer shell with shock-absorbing helmet material (EPS) - Good ventilation with 5 air inlets and 7 air outlets connected with flow channels - Semi-enclosing plastic ring connected to the adjustment system for optimum stability and form-fitness - Bottom edge protects the helmet from external influences - ActiCage, a structural reinforcement integrated in the EPS to optimise stability - Zoom Ace adjustment system with non-slip adjustment wheel for individual fit - Ponytail compatible and well suited for braided hairstyles

Strap into an evolution and welcome the Aircraft2. Developed in conjunction with athletes at the forefront of riding and racing like Sam Hill, the Aircraft2 takes notes from its predecessor, the Aircraft, and builds. Offering superior protection for when your routine gets off track with our proprietary Smartshock Technology, the most advanced helmet to date is ready for flight. - Carbon Fiber shell with paten pending injection molded chin bar integration - Smartshock® Rotational Protective System (14 point) - Incredibly sturdy, full face downhill helmet - Multi-density EPS foam injection molded with polycarbonate in size specific molds - Massive airflow with a class-leading 20 ventilation ports - Multi-point adjustable visor designed for maximum vision and goggle stowage - Washable, moisture-wicking anti-microbial liner - D-Ring buckle for maximum security

This helmet mount works with all CatEye Lights. Pair it with the Volt 800 for the ultimate trail solution.

The Tremor MIPS helmet's cool style is more than meets the eye. It features the latest in head protection technology, an easy-to-adjust fit system, and 18 vents for breathability, making it a big hit with parents and little shredders alike. Featuring some of the best technologies from our adult line, like In-Mold construction for reduced weight and enhanced durability, and our acclaimed Roc Loc Sport system for fast, secure fit adjustments, ensure that the Tremor is ready for any ride. The Tremor MIPS also includes an integrated Multi-Directional Impact Protection System (MIPS), which can redirect energy and provide more protection in certain impacts, providing the latest in head protection technology for junior riders. MIPS: - Integrated MIPS (Multi-Directional Impact Protection System)—allows you to customize fit/feel for great stability and long-range comfort while providing an added measure of protection from rotational forces in the event of an angled impact Construction: - In-Mold construction - Full Hardbody shell Shell Type: - Polycarbonate shell - Number of vents: 18 Sport: - Cycling Visor: - Removable visor Interior/Liner Type: - Quick-dry padding Fit system: - Roc Loc Sport MIPS Impact Liner Type: - EPS

- Direct Flow Cooling guides airflow into ultra-deep internal channels optimizing ventilation at high and low speeds - Moto-style extended protection visor is infinitely adjustable and removable - Integrated goggle strap retainer helps goggles stay in position - Low and high speed impact-tuned construction with optimized EPS density, and super-tough polycarbonate shell - ESS brings together CINCH Pro, Optimal Position Y, and LiteForm webbing for the best straight-out-of-the-box fit and comfort - TransTextura PLUS X-odor anti-microbial pads - MIPS is a low friction layer between the head and the helmet that provides added protection with respect to angled impacts - Women's

The Kali Grit Helmet is designed for performance road cycling. It features a Rheon Low-Density Layer (LDL) to protect you in the case of low-G linear or rotational impacts, and Kali's proprietary Supervents to increase overall strength and help with ventilation. The Grit also features the Frequency Fit System, with vertical adjust and dial retention, Fixed Strap Intersections, Unibody Construction and a Rollcage Internal PC Bridge, for added strength. - Rheon Low-Density Layer (LDL) reduces rotational impact forces up to 25% and reduces low-g linear forces up to 30% - Supervent: injection molded skeletal structure for added strength and larger volume intake vents - Frequency Fit System, with dial and vertical adjust offers three positions for maximum comfort and fit - Fixed Strap Intersections: Stops the straps from twisting, while keeping them flush against your face - Unibody Construction: Couples the upper and lower shells for a dialed fit and finish, while adding strength - Rollcage Internal PC Bridge: Used to increases the overall strength of the helmet

With aggressive venting to keep you cool, this helmet is packed with features in a deep-coverage design. The Lunati exceeds CE EN 1078 / CPSC 1203, fits likes a dream, and is ready for any off-road adventure. - Break-Away Moto Style Visor - Removable/Washable Liner - Anti-Microbial Pads/Bug Liner - Locking Buckle & Sliders - Micro-Fit Closure System - Compatible with Kali accessory mount Material: - PC Shell - EPS Foam Certifications: - CPSC - EN 1078 Sizing: - Small/Medium = 55 – 61cm - Large/X-Large = 60 – 63cm